This guide is for Oxleas staff who have been provided with an iPad that needs to be enrolled as a shared device
Before you start you will need to have:
If the device has already been wiped you can skip to the next step. You will be able to tell it has been wiped as it will be asking you to set the language and country.
If the device currently has a passcode on it then this should have been set to 123456 by the previous user.
If you are able to get into the device then you need to reset it to factory settings. Click here to see a guide on how to do that.
Select your Wi-Fi connection from the list and enter the password. Once you are connected tap Next in the top right corner.
You will have to travel to an Oxleas site and follow the instructions above.
These are the same credentials you may have used previously in this guide when connecting to our WiFi.
Set the password you have been told to use via your Service Desk request.
If you aren't prompted for this straight away, try opening Safari and then closing it again.
When setting the passcode you may find that the keyboard disappears with the below message. Pressing OK will bring the keyboard back.
Open Settings and tap on General at the left.
Tap on About at the right and then on Name at the top.
Rename the device to the device name you have been provided and then tap on the blue carriage return key on the keyboard to save.